- Diám.nominal
- 125
- 150
- 200
- 250
- 300
- 350
- 400
- 450
- Inside diameter
- 126
- 151
- 202
- 252
- 303
- 353
- 403
- 453
- H(mm)
- 192
- 213
- 300
- 375
- 435
- 520
- 580
- 676
- nº aros
- 4+1
- 4+1
- 5+1
- 5+1
- 5+1
- 6+1
- 6+1
- 6+1
chimney cap dimensions
According to the table. Nominal diameters 125 a 450mm.
Finishes
The standard finishes are galvanized and stainless steel AISI 304. You may provide them painted, polyester powder in oven dried RAL la carte.
Volumetric capacity of the exhaust air
Assembly chimney cap system
There are possibilities of Mounting:
- At the end of conduct, individual collectors,es, is holed and rivets on the outside of the last section.
- When multiple manifolds run inside a drawer force. In this case, the chimney cap the drawer is mounted on a flat work adaptation lid is mounted on the outside thereof. It has a straight wing of about 60mm. with holes evenly distributed around the perimeter to be secured with screws and dowels to work. When mounted on the outside of the parapet acts as rain gutter and sealing is not necessary. Also, hat is mounted on the end portion of the outer tube through fixing with rivets or tapping screws.
