- Diám.nominal
- 125
- 150
- 200
- 250
- 300
- 350
- 400
- 450
- Inside diameter
- 126
- 151
- 202
- 252
- 303
- 353
- 403
- 453
- H(mm)
- 192
- 213
- 300
- 375
- 435
- 520
- 580
- 676
- nº aros
- 4+1
- 5+1
- 5+1
- 5+1
- 6+1
- 6+1
- 6+1
- 6+1
Dimensions for chimney cap
According to the table below. Nominal diameters 125 a 450mm.
Finishes
The standard finishes are galvanized and stainless steel AISI 304. You may provide them painted, with polyester powder oven-dried RAL color on demand.
System chimney cap assembly for mounting There are two possibilities:
- At the end of conduct, individual collectors,es, is holed and rivets on the outside of the last section.
- When multiple manifolds run inside a drawer force. In this case, he a circular cap the drawer is mounted on a flat work adaptation lid is mounted on the outside thereof. It has a straight wing of about 60mm. with holes evenly distributed around the perimeter to be secured with screws and dowels to work. When mounted on the outside of the parapet acts as rain gutter and sealing is not necessary. Also, hat is mounted on the end portion of the outer tube through fixing with rivets or tapping screws.